Additional equipment

Omnicomm provides supplementary equipment to enhance the functionality of Omnicomm LLS sensors and your fuel management experience. From LLD Indicators to terminals and converters, Omnicomm provides everything you need to get set up and regain control of your fuel expenses.

The Omnicomm LLD fuel level indicator displays the current volume of fuel remaining in vehicle's tank, according to data obtained from Omnicomm LLS digital fuel level sensors.

Often, traditional fuel level indicators on vehicle dashboards behave erratically or are completely defective. Special machines and diesel locomotives are not even equipped with standard fuel level indicators, so there is no ability to gauge remaining fuel levels in these vehicle types. Therefore, drivers often simply do not know how much fuel is left in the tank, although this information is critical. With the Omnicomm fuel level indicator now drivers can easily see exactly how much fuel is remaining, allowing them to plan refueling appropriately. Omnicomm LLD also helps companies keep records about fuel consumption at the beginning and end of work shifts.

Key features
Versatile connectivity

It can be used as a part of the entire Omnicomm system, or independently – connected to Omnicomm LLS sensors, as well as with terminals from other manufacturers.

Versatile installation

The Omnicomm LLD indicator can be mounted on any type of vehicle, as well as special or stationary equipment.

Ease of use

The indicator can display the fuel remaining both in a separate tank, and the total volume as well. The driver needs to only touch a button to change the mode.

Accuracy

The fuel volume is displayed on the LLD screen with accuracy up to 1 liter.

Extra speed display mode

Omnicomm LLD indicator can display the current traverse speed – when connected to the Omnicomm onboard terminal. This is especially useful for railway equipment and deployments.

Reliability

The indicator is designed to operate in the most demanding conditions. The Omnicomm LLS indicator is fully functional in temperatures ranging from -40 to +70 degrees C.

Extra speed display mode

Omnicomm LLD indicator can display the current traverse speed – when connected to the Omnicomm onboard terminal. This is especially useful for railway equipment and deployments.

Low cost

Using an autonomous Omnicomm LLD indicator without any onboard terminal, the cost of equipping the vehicle is much lower.

Easy to install

Connecting the Omnicomm LLD indicator to a vehicle electrical system is not complicated and takes approximately 20 minutes.

Use case

Omnicomm is the technology partner for KAMAZ-master, a team of prominent racers, 3 time World Cup champions in off-road truck rallies, multiple winners of the International Rally Silk Road, as well as a numerous medalist and eleven-time winner of the Dakar Rally. Omnicomm developed the new, advanced multi-function LLD display to be installed in the truck cabin especially for KAMAZ-master.

The LLD display allows the crew to receive real-time information about amount of fuel remaining, control consumption and monitor the amount time and distance until refueling is required. Every extra unnecessary liter of fuel in the tank is extra weight, which slows down the truck and impacts performance. It is critically important to calculate and account for fuel consumption for the entire route of the race in order to deliver the best race performance possible. Omnicomm’s LLD display helps KAMAZ-master achieve gold.

Terminals
Omnicomm has a new line of onboard terminals
1
Versatility – Omnicomm onboard terminals can be installed to any type of vehicle
2
Functionality – monitoring of all vehicle parameters to meet the most specific customer needs
3
Efficiency – substantial maintenance cost savings
4
Reliability – onboard terminals in rugged casings
5
Open protocols – support of both inhouse and third-party software
6
Onsite or remote product and equipment training by service professionals
7
Special price offers and partnership terms
8
3-year warranty
Omnicomm Profi 2.0
Omnicomm Profi 2.0

Extended functionality for auxiliary equipment control in complex projects.

Rugged case protects against external impacts
Connectors protected using caps and corrugated hoses
Terminal tamper sensor

  • Can be mounted on any specialty vehicle
  • GLONASS and GPS support in base configuration
  • SIM chip can be mounted directly on the terminal circuit board
  • Support of simultaneous SIM card and SIM chip operation
  • CAN bus connection
  • Built-in voice communication amplifier
  • USB configuration interface
  • Remote terminal configuration
  • RS-232 and RS-485 interfaces for connecting additional devices
  • 1-wire interface for driver identity control and temperature sensors
  • 4 universal inputs for sensors
  • 2 universal inputs operating in “pulse” and “frequency” modes
  • 2 programmable outputs for operating mechanisms
  • Connection for up to six digital LLS sensors or four frequency LLS-AF sensors
More
Omnicomm Optim 2.0
Omnicomm Optim 2.0

Provides a value for money solution.

Highly reliable and secure casing
GLONASS and GPS support in base configuration
Internal slot for a second SIM card

  • Can be mounted on any specialty vehicle
  • GLONASS and GPS support in base configuration
  • SIM chip can be mounted directly on the terminal circuit board
  • Support of simultaneous SIM card and SIM chip operation
  • CAN bus connection
  • USB configuration interface
  • Remote terminal configuration
  • RS-232 and RS-485 interfaces for connecting additional devices
  • 1-wire interface for driver identity control and temperature sensors
  • 4 universal inputs for sensors
  • 2 programmable outputs for operating mechanisms
  • Connection for up to six digital LLS sensors or four frequency LLS-AF sensors
More
Omnicomm Light 2.0
Omnicomm Light 2.0

An affordable solution for mass applications.

Highly reliable and secure casing
Built-in GSM and GLONASS/GPS antennas
GLONASS and GPS support in base configuration

  • Can be mounted on any specialty vehicle
  • GLONASS and GPS support in base configuration
  • CAN bus connection
  • USB configuration interface
  • Remote terminal configuration
  • RS-485 interfaces for connecting additional devices
  • 2 universal inputs for sensors
  • 1 programmable outputs for operating mechanisms
  • Connection for up to two digital LLS sensors or one frequency LLS-AF sensor
More
Digital – analogue level converter (dalcon)

Omnicomm offers a Digital Analogue Level Converter – the DALCON device.
Intended for vehicles with more than one fuel tank, DALCON connects 2 LLS fuel level sensors to the single RS232 or analogue 0-2,5V; 0-5V input of the telematics or communication device when a vehicle is equipped with 2 fuel tanks.

DALCON is also required if the fuel tank is extremely long where a double LLS sensor installation will increase the accuracy of the fuel level readings. See how DALCON is used:


USB Connector Kit – UNU

UNU is a reusable kit designed to connect the LLS series fuel level sensors, LLS- ARF adapter and DALCON to laptop's USB port during the tuning and calibration process.

The UNU set consists of the main module (UNU interface box), and a set of cables with connectors and power adapter 220(240) VAC / 15 VDC.

The UNU kit has everything you need to connect Fuel Sensors to computers